Mitsubishi Lancer Owners Manual
Turn-signal leverInstruments and controls / Turn-signal lever
1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically
when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to change a lane, the turn-signal lamps and
indication lamp in the instrument cluster will only flash while the lever is operated.
Also, when you move the lever to (2) slightly then release it, the turn-signal lamps
and indication lamp in the instrument cluster will flash 3 times.
Note
► If the lamp flashes unusually quickly, the bulb in a turn-signal lamp may have
burned out. We recommend you to have the vehicle inspected.
► It is possible to activate the following functions.
For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized
Service Point.
On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.
Refer to the separate owner’s manual for details.
• Flashing of the turn-signal lamps when the lever is operated with the ignition
switch in the “ACC” position.
• Deactivate the turn-signal lamp 3-flash function for lane changes
• The time required to operate the lever for the 3-flash function can be adjusted.
For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.
Refer to the separate owner’s manual for details.
