Mitsubishi Lancer Owners Manual

Headlamp washer switch
Instruments and controls / Headlamp washer switch

The headlamp washer can be operated when the ignition switch is in the “ON” or “ACC” position and the headlamps are on.

Push the button once and the washer fluid will be sprayed on to the headlamps.

Mitsubishi Lancer: Headlamp washer switch. Note

Mitsubishi Lancer: Headlamp washer switch. ► If the ignition switch is in the “ON” or “ACC” position and the headlamps are Note

► If the ignition switch is in the “ON” or “ACC” position and the headlamps are on, the headlamp washer operates together with the windscreen washer the first time the windscreen washer lever is pulled.

Precautions to observe when using wipers and washers

► If the moving wipers become blocked by ice or other deposits on the glass, the motor may burn out even if the wiper switch is turned to OFF. If obstruction occurs, park your vehicle in a safe place, turn off the ignition, and clean the deposits from the glass so that the wipers operate smoothly.

► Do not use the wipers when the glass is dry.

They may scratch the glass surface and the blades wear out prematurely.

► Before using the wipers in cold weather, check that the wiper blades are not frozen onto the glass. The motor may burn out if the wipers are used with the blades frozen onto the glass.

► Avoid using the washer continuously for more than 20 seconds. Do not operate the washer when the fluid reservoir is empty.

Otherwise, the motor may burn out.

► Periodically check the level of washer fluid in the reservoir and refill if required.

During cold weather, add a recommended washer solution that will not freeze in the washer reservoir. Failure to do so could result in loss of washer function and frost damage to the system components.


© 2024 www.mitsuguide.com. All Rights Reserved.