Mitsubishi Lancer Owners Manual
Operating the system in manual air modeFor pleasant driving / Automatic air conditioning / Operating the system in manual air mode
Blower speed and ventilator mode may be controlled manually by setting the blower speed selection dial and the mode selection dial to the desired positions.
To return to automatic operation, set the dials to the “AUTO” position.
Demisting of the windscreen and door windows
► For safety, make sure you have a clear view through all the windows.
To remove frost or mist from the windscreen and door windows, use the mode selection
dial (
or
).
For ordinary demisting
Use this setting to keep the windscreen and door windows clear of mist, and to keep the leg area heated.
1. Set the air selection switch (A) to the outside position.
2. Set the mode selection dial to the
position.
4. Select your desired temperature by turning the temperature control dial.
5. Push the air conditioning switch (B).
For quick demisting
1. Set the mode selection dial to the
position.
3. Set the temperature to the highest position.
Note
► While the mode selection dial is set to the
position, the air conditioning
► To demist effectively, direct the air flow from the side ventilators towards the
door windows.
► Do not set the temperature control dial to the max. cool position. Cool air will
blow against the window glasses and prevent demisting.
► For vehicles with the Auto Stop & Go (AS&G) system, if the mode selection dial
is set to the demister position shown in the illustration, the Auto Stop & Go (AS&G)
system will not operate and the engine will not stop automatically even if the vehicle
is stopped.
This is to ensure that good visibility is maintained.
