Mitsubishi Lancer Owners Manual
Setting of door and rear hatch unlock function (vehicles equipped with the central
door lock switch)Locking and unlocking / Keyless entry system / Setting of door and rear hatch unlock function (vehicles equipped with the central
door lock switch)
The door and rear hatch unlock function can be set to the following two conditions.
Each time the door and rear hatch unlock function is set, a chime will sound to tell you the condition of the door and rear hatch unlock function.
1. Remove the key from the ignition switch.
2. Place the combination headlamps switch and dipper switch in the “OFF” position,
and leave the driver’s door open.
3. Press the LOCK switch (1) for 4 to 10 seconds and press the UNLOCK switch (2)
during this time.
4. Release in sequence the LOCK and UNLOCK switches within 10 seconds of pressing
the LOCK switch in step 3.
Note
► On vehicles equipped with Mitsubishi Multi- Communication System (MMCS), screen operations can be used to make the adjustment.
Refer to the separate owner’s manual for details.
