Mitsubishi Lancer Owners Manual

AWC control fluid
Maintenance / AWC control fluid

To check the fluid level

The AWC control fluid reservoir is in the luggage compartment.

Mitsubishi Lancer: AWC control fluid. ► Check the fluid level in the reservoir 90 minutes or more after turning the Note

► Check the fluid level in the reservoir 90 minutes or more after turning the ignition switch to the “LOCK” position.

1. Remove the lid of the cargo floor box (A) on the right side.

Mitsubishi Lancer: AWC control fluid. 2. Remove the cover (B) while pressing the top of the cover (B) and the hook

2. Remove the cover (B) while pressing the top of the cover (B) and the hook (C).

Mitsubishi Lancer: AWC control fluid. 3. Check to make certain that the AWC control fluid level is always between the

3. Check to make certain that the AWC control fluid level is always between the “MAX” and “MIN” level markings on the fluid reservoir and top up the fluid, if necessary.

Mitsubishi Lancer: AWC control fluid. Note

Mitsubishi Lancer: AWC control fluid. ► Do not spill the fluid onto the luggage compartment. Note

► Do not spill the fluid onto the luggage compartment.

If fluid is spilled, wipe it up immediately.

4. To install the cover, perform the removal steps in reverse.

Fluid type

Mitsubishi Lancer: AWC control fluid. Washer fluid


© 2024 www.mitsuguide.com. All Rights Reserved.